AIR-AP2200

COMMANDO Tri -Band 3 Radios 2.4 GHz + 5 GHz + 5GHZ 802.11ac, 2200Mbps, Wave 2.0, MU-MIMO 11ac, Build in High Gain 3dBi MU-MIMO Antenna, 300mW High Power, Concurrent 2.4GHz (400Mbps) + 5GHz (900Mbps) + 5GHz (900Mbps), Gigabit 1 WAN PoE & 1 LAN port, 32 MB Flash, 512MB DDR3 RAM, Dual Mode FIT and FAT, 3 in 1 Access Point Gateway, Repeater, Wireless AP, High Power Industrial Ceiling PoE Wireless Access Point.

AIR-AP2200 is Tri -Band 3 Radios 2.4 GHz + 5 GHz + 5GHZ 802.11ac, High Performance PoE Ceiling Wireless Access Point, Wave 2.0, MU-MIMO 11ac, Build in High Gain 3dBi MU-MIMO Antenna, 300mW High Power, Work on 2.4GHz (400Mbps) + 5GHz (900Mbps) + 5GHz (900Mbps), Max data rate can be 2200Mbps, Support Wireless AP, Gateway, Wi-Fi Repeater to meet with different installation requirement, Work with WLAN Controller, Centralized Configuration and Management, easy to achieve Wi-Fi Coverage and Maintenance, AIR-AP2200 Can Access into Cloud Server to do remote monitor and Captive Portal Authentication for more Business value, best choice for Enterprise Wi-Fi Application, Access more end Users, supply more stable and faster Wi-Fi access in client density environments such as hotel, meeting room, KTV, shopping mall.

Main Features:

  • Tri -Band 3 Radios 2.4 GHz + 5 GHz + 5GHZ 802.11ac, 2200Mbps Data Rate, Comply with IEEE 802.11ac/b/g/n,
  • Wave 2.0, Build in High Gain 3dBi MU-MIMO Antenna, 300mW High Power, Stronger Signal Strength for More Wireless coverage, More User and More Stable
  • Multi SSID up to 12 (4 SSID in 2.4GHz, 8 SSID in 5GHz), Support SSID Broadcasting
  • 1*10/100/1000Mbps WAN PoE Port, 1*10/100/1000Mbps LAN Port.
  • Support Gateway (PPPOE, static IP, dynamic IP) , Wireless AP, Repeater, WISP operation mode
  • With Build in Firewall, IP Filter, URL Filter and MAC Filter
  • Support DDNS, VPN pass through, Port forwarding and DMZ host
  • Support 64/128-bit WEP security, EAP, 128bit WPA (TKIP/AES) security
  • Support Active IEEE 802.3at 48V PoE Standard
  • 32M Flash, 512M DDR3 RAM
  • Comply with IEEE 802.3az Standard, RF Power Adjustment and Frequency Analyzer for Better Application in Different Environment

Product Features:

Wave 2 Technology

With Wave 2.0 Technology, 256QAM Modulation, support MU-MIMO (Multi-User Multiple-Input Multiple-Output), 8 Spatial Steams, greatly to improve the communication efficiency.

Power over Ethernet and DC Power available

AIR-AP2200 has integrated IEEE802.3at Power over Ethernet (PoE), for easy installation and lower cost. What’s more, it support DC input if need, it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.

High Power for More Range and Stable Signal

Designed in Power Amplifier on PCB board, the power can be 300mW high power, 3dBi MIMO high gain antenna, together with Ceiling mount, greatly increase the wireless range and supply stable Wi-Fi signal for users.

Metal Case, Perfect Heat Dissipation to Extend the Working Life

The bottom shell with metal shell, improved the heat dissipation function, make it work as normal in -30°C to 70°C, extend the device working life.

Access Controller System & Cloud Management System

With Access Control System, plug and play, zero configure the AP’s IP address, ESSID, Channel, Password, upgrade firmware, backup and restore....
What’s more, the AC controller with local authentication function, easy to do advertisement and captive portal authentication like Member/WeChat/SMS login.
Besides that, administrator can remote manage through AC controller or cloud server at any place/time, simple and cost save in maintenance.

Hardware
Standard 802.11ac/b/g/n, MU-MIMO technology
Memory 512MB DDR3 RAM
Flash 32MB
Interface
1 * 10/100 /1000Mbps RJ45 WAN Port
1 * 10/100 / 1000Mbps RJ45 LAN Port
1 * Reset button, press 10 seconds to revert to default setting
Antenna Build in 3dBi MIMO Antenna
Power consumption 48V PoE<30W
Size 198mm X 32mm
RF Data
Frequency
2.4G:802.11b/g/n: 2.4GHz – 2.484GHz
5GHz:802.11a/n/ac MIMO: 5.150GHz~5.850GHz
Country code FCC,IC,ETSI,MKK,MKK1,MKK2,MKK3,NCC,RUSSIAN,CN
Modulation
OFDM = BPSK,QPSK, 16-QAM, 64-QAM, 128-QAM, 256-QAM
DSSS = DBPSK, DQPSK, CCK
Throughput 2200Mbps
2.4G RF Power (IPQ4019)
802.11b 11M 23±2dBm 1M 25±2dBm
802.11g 54M 22±2dBm 6M 24±2dBm
802.11n HT20 MCS7 21±2dBm MCS0 23±2dBm
802.11n HT40 MCS7 21±2dBm MCS0 23±2dBm
5G RF Power (IPQ4019)
802.11a 54M 19±2dBm 6M 21±2dBm
802.11n HT20 MCS7 18±2dBm MCS0 20±2dBm
802.11n HT40 MCS7 18±2dBm MCS0 20±2dBm
802.11ac HT80 MCS9 17±2dBm MCS0 19±2dBm
5G RF Power (QCA9886)
802.11a 54M 19±2dBm 6M 21±2dBm
802.11n HT20 MCS7 18±2dBm MCS0 20±2dBm
802.11n HT40 MCS7 18±2dBm MCS0 20±2dBm
802.11ac HT80 MCS9 17±2dBm MCS0 19±2dBm
2.4G Receive Sensitivity
802.11b 11M -85dBm 1M -94dBm
802.11g 54M -72dBm 6M -90dBm
802.11n HT20 MCS7 -70dBm MCS0 -88dBm
802.11n HT40 MCS7 -68dBm MCS0 -86dBm
5G Receive Sensitivity
802.11a 54M -72dBm 6M -90dBm
802.11n HT20 MCS7 -70dBm MCS0 -88dBm
802.11n HT40 MCS7 -68dBm MCS0 -86dBm
802.11ac HT80 MCS9 -58dBm MCS0 -85dBm
EVM 2.4G EVM: 802.11b: ≤-10 dB; 802.11g: ≤-25 dB; 802.11n: ≤-28dB
5G EVM: 802.11a: ≤-25 dB; 802.11n: ≤-28 dB; 802.11ac: ≤-32 dB
PPM ±20ppm
Max Users 256+
Firmware Features
Operation mode Wireless AP, Gateway, WISP, Wi-Fi Repeater
WAN Type Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access)
Wireless Security 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption
SSID Multiple SSID (4 SSID for 2.4G, 8 SSID for 5.8G)
Firewall DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter IP and MAC Address Binding
Protocols IPv4
Others
Package Contents COMMANDO Tri -Band wireless Access Point
Ethernet Cable
Quick Installation Guide
Setting Accessory
System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux
Environment Operating Temperature: -20~55 ℃
Limit working temperature: -30~70 ℃
Storage Temperature: -40~70 ℃
Humidity: 5%~95% non-condensing
Management Firmware GUI , Remote Management, WLAN Controller, Cloud Management System
Sr.No. Image Part Code Description
1 AIR-AP300 COMMANDO 2.4 GHz 300 Mbps, MIMO, Controller-Based/Stand-Alone, Multi-Mode, Business Series Access Point
2 AIR-AP750 COMMANDO Dual Band 2.4GHz+5GHz 802.11ac, 750 Mbps, Controller-Based/Stand-Alone, Multi-Mode, Business Series Access Point
3 AIR-AP1200 COMMANDO Dual Band 2.4GHz+5GHz 802.11ac, 1200 Mbps, Controller-Based/Stand-Alone, Multi-Mode, Enterprise Series Access Point
4 AIR-AP2200 COMMANDO Tri -Band 3 Radios 2.4 GHz + 5 GHz + 5GHZ 802.11ac, 2200Mbps, Wave 2.0, MU-MIMO 11ac, Build in High Gain 3dBi MU-MIMO Antenna, 300mW High Power, Concurrent 2.4GHz (400Mbps) + 5GHz (900Mbps) + 5GHz (900Mbps), Gigabit 1 WAN PoE & 1 LAN port, 32 MB Flash, 512MB DDR3 RAM, Dual Mode FIT and FAT, 3 in 1 Access Point Gateway, Repeater, Wireless AP, High Power Industrial Ceiling PoE Wireless Access Point.
5 AIR-AP1300 COMMANDO Dual Band 2.4 GHz + 5 GHz 802.11ac, 1300Mbps, Wave 2.0, MU-MIMO 11ac, Build in High Gain 3dBi MU-MIMO Antenna, 300mW High Power, Concurrent 2.4GHz (400Mbps) + 5GHz (900Mbps), Gigabit 1 WAN PoE & 1 LAN port, 32 MB Flash, 512MB DDR3 RAM, Dual Mode FIT and FAT, 3 in 1 Access Point Gateway, Repeater, Wireless AP, High Power Industrial Ceiling PoE Wireless Access Point.

Awards

Certification