AIR-CPE10K+
COMMANDO Outdoor CPE/Bridge with LED display, High power industrial 5G outdoor CPE/Bridge with the next generation 802.11ac Wi-Fi standard, 802.11 ac/b/g/n 5 GHz 900 Mbps, MIMO 18dBi Dual Polarized High Gain Antenna, 500mW RF Power, Multi-Mode, Support Multi SSID up to 4, PTP/PTMP, 10KM+ Distance Coverage
4 in 1 Operation Mode Wireless AP, Gateway, Wireless Bridge & Super WDS, Supports HI-MAX TDMA Technology, Support Multi SSID up to 4, Support Beamforming Technology, MIMO High Gain Omni 18dBi Internal Antenna, 802.11ac, 2T2R 900M MIMO Technology, 16MB Flash, 128M DDR2 RAM, Support 24V Passive PoE

Information

AIR-CPE10K+ is a 900Mbps outdoor wireless CPE/Bridge, Build in 15dBi Omni antenna, 5KM+ Outdoor Wi-Fi Distance Coverage. It supports Wireless AP, Gateway, Wireless Bridge & Super WDS Operation Mode, effective solution for outdoor Wi-Fi coverage application. With an outdoor waterproof and dustproof enclosure, built in lighting protection IC, support 24V passive PoE, 2T2R 900M MIMO Technology, 900Mbps high speed, integrated IEEE 802.3af PoE Power over Ethernet (PoE), it can be installed in areas where power outlets are not readily available.

At-a-Glance

  • 900Mbps outdoor wireless CPE/Bridge
  • 4 in 1 Operation Mode Wireless
  • Support Multi SSID up to 4
  • Supports PTP/PTMP Distance up to 5000 meters.
  • Support WDS PTP/PTMP connection by LED display configuration
  • Supports HI-MAX TDMA Technology (Time-division multiple access)
  • Support 24V POE
  • Build in 18dBi Omni Antenna
  • 2T2R 802.11ac, 900M MIMO Technology
  • Waterproof and Dustproof Enclosure
  • Support Beamforming Technology
  • With Wi-Fi Channel Analysis Tool

Features

AIR-CPE10K+ Supports HI-MAX TDMA Technology (use polling technique to solve the hidden node and resource waste problem between the CPE and base station, provide low latency, high throughput in PTP/PTMP application likes IP camera, long range Wi-Fi Transmission), Gateway, Wireless AP, WISP, WDS operation mode for all wireless coverage.

900Mbps High Data Rate, High Performance

AIR-CPE10K+ support Wireless AP, Gateway, Wireless Bridge, super WDS operation mode, to suit for variety application environment. LED display, easy to setup IP address, signal strength, Channel and WDS connection by Function/Selection switch together with LED display, no need to access into GUI, avoid the complex setup program, save much human work and cost, make the long range wireless coverage, data transmit and wireless monitoring simple and professional.


Time-division multiple access


Time-division multiple access (TDMA) is a channel access method for shared-medium networks. It allows several users to share the same frequency channel by dividing the signal into different time slots The users transmit in rapid succession, one after the other, each using its own time slot. This allows multiple stations to share the same transmission medium (e.g. radio frequency channel) while using only a part of its channel capacity


Power over Ethernet (PoE)

IEEE 802.3af Power over Ethernet (PoE), work with standard PoE switch, 24V passive PoE Integrated, Plug and Play, installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.


Multiple Operation Mode for Multiple Application

Support Wireless AP, Gateway, Wireless Bridge & Super WDS to meet with different installation requirements, such as Gateway for home use, Wi-Fi Repeater to extend the exist Wi-Fi signal to more range

Specification

Hardware
Wireless Technology 802.11ac/a/n standard, 2X2 900Mbps MIMO Technology
Device Interface
2*10/100/1000Mbps RJ45 Ports
1*Reset Button for restore factory default settings
1*DC power Port
1*WDS Switch button to do PTP/PTMP connection
Antenna 18dBi directional antenna
LED Indictor Power,wifi,WAN,LAN, Signal Strength
Size 168mm*88mm*57.6mm
Power DC 12V/1A;24V PoE Power
Device Size 315mm*145mm*80mm
Transmission Data rate 900Mbps
Software Features
Working Mode Gateway/AP/Repeater/WISP/WDS/AP mode
Communication Standard
IEEE 802.11ac
IEEE 802.11n
IEEE 802.11a
Wireless Setting
Intelligent Channel Analysis
Distance Controll 802.1x ACK Time Output
Virtual SSID up to 4
BSSID
Wireless Security
WEP Encryption-64/128/152 bit
WPA/WPA2 Personal Encryption (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise Encryption (WPA-EAP using TKIP)
High SSID
System Setting Web-based configuration (HTTP/Telnet)
Firmware Upgrade Upgrade firmware via web browser or TFTP
Administration Management Admin User name/Password can be configured
System Monitoring Device and Networking status statistic
Log Support local log, host log, log file exporting
Reset Reset to factory defaults
Backup Backup device configuration, then restore this configuration if need
Application Environment
Temperature
Working Temperature: -20°C~55°C
Storage Temperature: -40°C ~ 70°C
Humidity
Working Humidity 5%~95% RH No condensation
Storage Humidity 5%~95% RH No condensation

Awards


Certification