AIR-APO1200
COMMANDO Outdoor Access Point, 802.11ac Wi-Fi high power industrial use Outdoor wireless access point Multi-mode, 1200 Mbps, High Power Outdoor wireless AP.
4 in 1 High Power Outdoor wireless Access Point, 1200Mbps high power industrial Outdoor wireless access point with the next generation 802.11ac Wi-Fi standard, 2x2 MIMO technology, dual band, 2.4GHz(300Mbps) and 5GHz(900Mbps), Gigabit WAN/LAN port, the fast Ethernet data rate and clear frequency 128+ end, MIMO High Gain Omni 5dBi Internal Antenna, 500mW high power, more than 500 meters Wi-Fi range, 16M Flash, 128M DDR2 RAM, PoE Support, Operation Mode Gateway Mode, Wi-Fi Range Extender/Repeater Mode, WIPS Mode (Wireless Internet Service Provider) & Access Point Mode

Information

AIR-APO1200 is a 1200 Mbps outdoor wireless AP with Qualcomm Chipset, build in 5dBi Omni antenna, more than 500 meters outdoor Wi-Fi coverage. It supports Wireless AP, Gateway, WISP, Wireless Bridge operation mode, effective solution outdoor Wi-Fi coverage application. With an outdoor waterproof and dustproof enclosure, built in lighting protection IC, support 24V passive PoE, MIMO Technology, 1200Mbps high speed, integrated IEEE 802.3af PoE Power over Ethernet (PoE), it can be installed in areas where power outlets are not readily available.

Main Features

  • Comply with IEEE 802.11ac/b/g/n, dual band, 1200Mbps Data Rate
  • 1*10/100/1000Mbps WAN Port,1*10/100/1000Mbps LAN Port
  • 1000mW high power, Qualcomm Chipset, 16M Flash, 128M DDR2 RAM, more user, more stable
  • Support 48V active PoE, work with IEEE 802.3at standard PoE switch or 48V PoE adapter.
  • Support SSID broadcasting, Multi SSID up to 8 (4 SSID in 2.4GHz, 4 SSID in 5GHz), support tag VLAN based on SSID to protect the whole data safety.
  • Support Gateway (PPPOE, static IP, dynamic IP) , Wireless AP, Repeater, WISP operation mode
  • With function of firewall, IP filter, URL filter and MAC filter
  • Comply with IEEE 802.3az standard, RF power adjustment and frequency analyzer for better application in different environment
  • Support DDNS, VPN pass through, Port forwarding and DMZ host
  • Support 64/128-bit WEP security, 128bit WPA (TKIP/AES) security

Features

1200Mbps High Data Rate, High Performance and Adjustable RF Power

Equipped enterprise high performance Qualcomm Chipset, Comply IEEE 802.11n MIMO Technology, 1200Mbps high speed, allow all connected devices to achieve faster upload/download Ethernet. With powerful amplifier, improved the Wi-Fi range for some area with small quantity wireless AP, Can cut down RF power to suit for some high density wireless AP area to avoid Wi-Fi interference.


Power over Ethernet (PoE)

Integrated IEEE 802.3af Power over Ethernet (PoE), work with standard PoE switch, plug and play, installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.


Multiple Operation Mode for Multiple Application

Support Wireless AP, Gateway, Wi-Fi Repeater to meet with different installation requirements, such as Gateway for home use, Wi-Fi Repeater to extend the exist Wi-Fi signal to more range


Multi SSID, Tag VLAN, AC Controller Centralized Management, Cloud Server Captive Portal Authentication

Support Multi SSID up to 4, each SSID support tag VLAN for User isolation. Work with WLAN Controller, centralized configuration in IP address, SSID, Password, Tag VLAN, RF power adjustable, then remote management, easy to achieve Wi-Fi Coverage and maintenance. Besides that, access into cloud server to do advertisement and Captive Portal authentication guest, to create more business value.

Specification

Hardware
Chipset Qualcomm QCA9563 + QCA9882 +QCA8334
Standard 802.11ac/b/g/n, MIMO technology
Memory 128MB DDR2 RAM
Flash 16MB
Interface
1 * 10/100/1000Mbps RJ45 WAN Port, WAN port support IEEE 802.3at standard PoE
1 * 10/100/1000Mbps RJ45 LAN Port
1 * Reset button, press 15 seconds to revert to default setting
Antenna Build in omni antenna, 5dBi, MIMO
Power consumption 48V PoE<30W
Size 315mm * 145 mm * 80 mm
RF Data
Frequency
2.4G: 802.11b/g/n; 5GHz: 802.11a/n/ac
2.4GHz: 2.312GHz to 2.4835GHz
5GHz: 5.020 - 6.1000 GHz
Modulation
OFDM = BPSK,QPSK, 16-QAM, 64-QAM
DSSS = DBPSK, DQPSK, CCK
Data Rate 1200Mbps (2.4G 300Mbps, 5.8G 900Mbps)
Receive Sensitivity & RF Power
RF Power 22.4G:11n @MCS7:23±2DB, @MCS0:25±2DB.
11g @54M:24±2DB, @6M:26±2DB
11b @11M:26±2DB, @1M:28±2DB.
5.8G: 11a @54M:24±2DB, @6M:26±2DB.
11n @MCS7:22±2DB, @MCS0:24±2DB.
11ac @MCS9:21±2DB, @MCS0:23±2DB.
Receive Sensitivity 2.4G:11n:-70dbm@MCS7, -88dbm@MCS0.
11g: -72dbm@54Mbps, -88dbm@6Mbps.
11b: -85dbm@11Mbps, -94dbm@1Mbps.
5.8G: 11a: -72dbm@54Mbps, -90dbm@6Mbps.
11n: -70dbm@MCS7, -90dbm@MCS0.
11ac:-60dbm@MCS9, -86dbm@MCS0.
EVM 11n: ≤-28 DB
11g: ≤-25 DB
11b: ≤-10 DB
11a: ≤-25 DB
PPM ±20ppm
Max Users 128
Firmware Features
Operation mode Wireless AP, Gateway, WISP, Wi-Fi Repeater
WAN Type Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access)
Wireless Security 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK, 802.1x encryption
SSID Multiple SSID (4 SSID for 2.4G, 4 SSID for 5.8G)
Firewall DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter IP and MAC Address Binding
Protocols IPv4
Others
Package Contents 1200Mbps Dual Band wireless access point
Ethernet Cable
Quick Installation Guide
Setting Accessory
System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux
Environment Operating Temperature: -40~55
Storage Temperature: -40~70
Operating Humidity: 10%~90% non-condensing;
Storage Humidity: 5%~90% non-condensing
Management Firmware GUI , Remote Management, WLAN Controller, Cloud Management System

Awards


Certification