COMMANDO 10/100/1000M, Single Mode, Single Fiber, 1310/1550nm-1550/1310nm, 3KM
COMMANDO Un-Managed, High-Speed, 10/100/1000TX to 1000FX, SC, Single Mode, Single Fiber, 1310/1550nm-1550/1310nm, 3KM, ideal for long distance transmission in broadband campus network, cable TV and intelligent broadband FTTB/FTTH networks


10/100/1000M adaptive Ethernet optical Media Converter is a designed ideal for optical transmission via high-speed Ethernet. It is capable of switching between twisted pair and optical and relaying across 10/100 Base-TX/1000 Base-Fx and 1000Base-FX network segments, meeting long-distance, high-speed and high-broadband fast Ethernet workgroup users’ needs, achieving high-speed remote interconnection for up to 100 km's relay-free computer data network. With steady and reliable performance, design in accordance with Ethernet standard and lightning protection, it is particularly applicable to a wide range of fields requiring a variety of broadband data network and high-reliability data transmission or dedicated IP data transfer network, such as telecommunication, cable television, railway, military, finance and securities, customs, civil aviation, shipping, power, water conservancy and oilfield etc, and is an ideal type of facility to build broadband campus network, cable TV and intelligent broadband FTTB/FTTH networks.

The COMMANDO media converter designed to convert 100BASE-FX or 1000BASE-FX fiber to 100Base-TX or 1000Base-TX copper media or vice versa. The COMMANDO media converter is designed for use with Multi-Mode or Single-Mode Dual Fiber & Single fiber cable utilizing the SC-Type connector. Designed under IEEE 802.3u 10/100Base-TX or 10/100/1000Base-TX and 100Base-FX or 1000 Base-FX standards. The COMMANDO supports long wave (LX) laser specification at a full wire speed forwarding rate. It works at 1310/1550nm or on both transmitting and receiving data. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port and front panel status LEDs.


Technical Parameters for 10/100/1000M Adaptive Fast Ethernet Optical Media Converter
Number of Network Ports 1 channel
Number of Optical Ports 1 channel
NIC Transmission Rate 10/100/1000Mbit/s
NIC Transmission Mode 10/100/1000M adaptive with support for automatic inversion of MDI/MDIX
Optical Transmission Rate 1000Mbit/s
Operating Voltage AC 220V or DC +5V
Overall Power <3W
Network Ports RJ45 port
Optical Specifications Optical Port: SC, ST FC (Optional)
Multi-Mode: 50/125, 62.5/125um
Single-Mode: 8.3/125,
8.7/125um, 9/125,10/125um
Wavelength: Single-Mode: 1310/1550nm
Data Channel IEEE802.3x and collision base backpressure supported Working Mode: Full/half duplex supported Transmission Rate: 1000Mbit/s with error rate of zero
Operating Temperature 0℃ to +70℃
Storage Temperature -20℃ to +85℃
Humidity 5% to 90%
MTBF 100,000 hours
SC ST FC fiber connection optional

LED Indicators:

Instructions on Front Panel Identification for front panel of the media converter is shown below:

Identification of Media Converter

  • Identification of Media Converter TX - transmitting terminal; RX - receiving terminal;
  • PWR Power Indicator Light – “ON” means normal operation of DC 5V power supply adaptor.
  • 1000M Indicator Light “ON” means the rate of the electric port is 1000 Mbps, while “OFF” means the rate is 100 Mbps.
  • LINK/ACT (FP) “ON” means connectivity of the optical channel; “FLASH” means data transfer in the channel; “OFF” means non-connectivity of the optical channel.
  • LINK/ACT (TP) “ON” means connectivity of the electric circuit; “FLASH” means data transfer in the circuit; “OFF” means non-connectivity of the electric circuit.
  • SD Indicator Light “ON” means input of optical signal; “OFF” means non input.
  • FDX/COL: “ON” means full duplex electric port; “OFF” means half-duplex electric port.
  • UTP Non-shielded twisted pair port.