The COMMANDO 10/100/1000M Media Converter with the main function of photo electricity switch over between 1000BASE-TX or 100BASE-TX and 1000BASE-FX. Media converter transmits IP data over fiber, applied in many places where need long distance transmission. Low consumption and high resistance to electromagnetic interference of the optical fiber make the transmitting distance spread from 100m to several decades KM or hundred KM, improve the communication quality as well. And make the server, repeaters, switch, terminal PC connect easily.
The COMMANDO media converter designed to convert 1000BASE-FX or 1000BASE-FX fiber to 1000Base-TX or 100Base-TX copper media or vice versa. The COMMANDO media converter is designed for use with Multi-Mode or Single-Mode Dual Fiber & Single fiber cable utilizing the SC-Type connector. Designed under IEEE 802.3u 100/1000Base-TX or 10/100/1000Base-TX and 1000 Base-FX standards. The COMMANDO supports long wave (LX) laser specification at a full wire speed forwarding rate. It works at 1310/1550nm or on both transmitting and receiving data. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port and front panel status LEDs.
IEEE802.1d Building tree protocol
IEEE802.3u Quick Ethernet (100Mbps)
IEEE802.1p QOS PRI
IEEE802.3x Full duplex flux control
IEEE 802.3ab 100Base-TX/FX
|Power supply||110VAC or 220VAC
|Operation Temp||0℃~+70℃||Storage Temp||-40℃~+85℃|
|Relative Humidity||5%~90%(non-condensation)||Shipping weight||0.8kg|
Instructions on Front Panel Identification for front panel of the media converter is shown below:
|Converter Type||Stand-alone Unmanaged||Port Type||1× RJ45 to 1× SC|
|RJ45 Rate||10/100/1000Base||Fiber Rate||1000Base|
|Fiber Mode||Single Mode||Fiber Type||Single Fiber|
|Power||110VAC or 220VAC+12VDC||Storage Temperature||-40°C~+85°C|